Panasonic KX-UT113 Operating Instructions Manual

Also see for KX-UT113: Configuration guides User guide Operating instructions Administrator's guide Administration guide

Contents

Panasonic KX-UT113 Operating Instructions Manual Manual pdf 25 page image

Feature OperationsMaking CallsThis section explains the basic methods for making acall.Making a Call1. In stand-by mode, go off-hook.2. Enter the number you want to call.3. Press [ENTER], or wait a few seconds for thenumber to be dialed.4. To end the call, go on-hook.Pre-dialingIn stand-by mode, you can start dialing (max. 32 digits)while still on-hook.• To delete a number you entered, press .• To clear the entire number, press and hold .• To connect the call, go off-hook or press [ENTER].Note• For KX-UT133/KX-UT136, you can also pressan idle DN button (flexible button) to connect thecall. For details about DN buttons, see "FlexibleButtons (KX-UT133/KX-UT136 only)(Page 34)".• If you receive an incoming call duringpre-dialing, the display changes to the incomingcall screen. For KX-UT133/KX-UT136, you canclose the incoming call screen by pressing, and continue pre-dialing.Making a Call from thePhonebook ListScrolling through all entries1. Press .2. Press [ ] or [ ] to select an entry.3. Go off-hook.4. To end the call, go on-hook.Note• For KX-UT133/KX-UT136, you can also pressan idle DN button (flexible button) in step 3 toconnect the call. For details about DN buttons,see "Flexible Buttons (KX-UT133/KX-UT136only) (Page 34)".• For KX-UT113/KX-UT123, you can pressinstead of going off-hook. If more thanone line is available at your unit, select the lineto use, and then press [ENTER].• In step 2, if multiple phone numbers are storedfor the entry, you can press and thenselect the phone number to call.Searching by name1. Press .2. Press .3. Enter the name (max. 12 characters) you want tosearch for.4. Press [ENTER].The entry that matches your search appears.5. Go off-hook.6. To end the call, go on-hook.Note• For KX-UT113/KX-UT123, you can pressinstead of going off-hook. If more thanone line is available at your unit, select the lineto use, and then press [ENTER].• For details about entering characters, see"Entering Characters (Page 47)".• In step 4, if multiple phone numbers are storedfor the entry, you can press and thenselect the phone number to call.• If you do not press any buttons for 1 minute, theunit will return to stand-by mode.Dialing by Using Call LogsThe last 30 incoming calls and outgoing calls are storedin their respective logs, in order of newest to oldest call.You can make calls to the numbers listed in the call logs.1. Press .2. Press [ ] or [ ] to select the call log type, and thenpress [ENTER].3. Press [ ] or [ ] to select the desired entry.4. Go off-hook.5. To end the call, go on-hook.Note• For KX-UT133/KX-UT136, you can also pressan idle DN button (flexible button) in step 4 toconnect the call. For details about flexiblebuttons, see "Flexible Buttons (KX-UT133/KX-UT136 only) (Page 34)".Document Version 2011-06 Operating Instructions 25Feature Operations