Panasonic KX-UT136 User Manual

Also see for T-Mobile KX-HDV130: Administrator's guide Operating instructions Administrator's guide User guide Quick start guide

Contents

Panasonic KX-UT136 User Manual Manual pdf 8 page image

Open a new browser window and enter your phone IP address in order to access the phonenweb administration interface login screen. Example: http://192.168.1.22.Login to the phone web administration interface with your username and password. Pleasennote, factory default login details are username: admin and password: adminpass.HTTP ProvisioningHTTP Provisioning offers additional layer of security compared to TFTP so it is recommended touse it when provisioning Panasonic devices.NOTE: In order to use HTTP provisioning you must set up HTTP Username and HTTP passwordon PBXware. To do that, log in to your PBXware GUI and navigate to:HTTP Username and HTTP Password are set under:Settings -> Servers -> YourServerName (edit) -> Auto Provisioning (section) -> HTTPUsername/HTTP PasswordOn Multi-tenant PBXware HTTP username and password are set per tenant:HTTP Username and HTTP Password are set under:Settings -> Servers -> TenantName (edit) -> Auto Provisioning (section) -> HTTPUsername/HTTP PasswordOnce you are logged in your phones web interface click Network and once in Network settingsnclick HTTP Client Settings in left pane. Under HTTP Authentication for Authentication IDenter HTTP username you set in your PBXware and for Authentication Password enter yourHTTP password and click Save button.After you changed these settings click Maintenance tab and then click ProvisioningnMaintenance in left pane. Make sure Enable Provisioning is set to Yes and enter yourPBXware address in Standard File URL field.For HTTP provisioning link must be in this form:http://192.168.1.1/prov/{mac}.cfgReplace 192.168.1.1 with your PBXware IP address or domain name and click Save to preservechanges and initiate auto provisioning.Once you click Save button your phone will reboot and send request for auto provisioningnconfiguration file to PBXware. If all settings are configured properly phone should receive theconfiguration file and register to assigned extension once it boots up. To make sure everythingworks fine you can dial *123 to see if you will get into the voicemail sound prompt.TFTP ProvisioningTFTP provisioning does not require setting up HTTP username and password on PBXware andalso you don't have to enter these credentials in the phone.After you set up extension as explained above, log in to your phone web interface, clicknMaintenance tab and then click Provisioning Maintenance in left pane. Make sure EnableProvisioning is set to Yes and enter your PBXware address in Standard File URL field.For HTTP provisioning link must be in this form:

/ 9

Related manuals for Panasonic T-Mobile KX-HDV130