Confirm that the other equipment (display, videocameras, etc.) is connected to the HDCommunication Unit, and the power is turnedon for all the equipment.When the mark is displayed;When the connection cannot be established:When there is a problem with the connection, or with one of the connected devices,or when there is a device that is not connected, the "—" mark will be displayed.Check that the devices being used are properly connected to the main unit, that thepower is turned on for all connected devices, and that no more than 5 boundarymicrophones (digital interface type) are connected.Press [STATUS].Press [BACK] to returnto the previous screen.The following methods can also be used to make a call.Calling from the Call History Calling by entering an address directlyYou can also enter a speed dial number, which are displayed innumerical order (1 to 600), to select the party you want to call.During multiple-party video conference calls, a dialogue boxto select the party whom you want to disconnect is displayed.Press [END]. The Home screen is displayed.When there is an incoming call ring and a dialogue box isdisplayed, press [START].If Automatic Answer is set, when a video conference call isincoming the call will be automatically answered after onering, and transmission then begins.Basic Operation GuideHD Visual Communication Unit Model No.Starting a Video ConferenceBefore Starting a Video ConferenceStarting a Video ConferencePress [HOME].Press a "One-Touch Connection number (1-5)".Select "Contact List" using [▲][▼] and press [ENTER].Select the entry you want to call using [▲][▼][◄][►].Select "Profile" using [▲][▼] and press [ENTER].Select the profile you want to use to make a call using [▲][▼].Press [START] to start the call.Calling Using One-Touch Connection number From theHome ScreenPress [MENU].Calling from the Contact List Answering a Video Conference CallEnding a Video Conference CallPress [MENU].Calling using a ProfileTurn on the power to themain unit.The Home screen is displayed.• The information registered in the selectedOne-Touch Connection number is displayed.KX-VC1600A/KX-VC1300AKX-VC2000/KX-VC1600/KX-VC1300/KX-VC1000/KX-VC2000SX/KX-VC1600SX/KX-VC1300SX/KX-VC1000SX/KX-VC1600A/KX-VC1300A