Panasonic KX-VC300 User Manual

Also see for KX-VC300: Brochure & specs Frequently asked questions Manual Brochure Operating manual

Contents

Panasonic KX-VC300 User Manual Manual pdf 22 page image

Adding Contacts to theContact ListRegistering a Single-partyContact1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "New Contact" and press[Enter].• The contact list registration screen is displayed.3. Use [ ][ ] to select the following items for input:"Group/Site": Enter a name for the contact (up to24 characters)."Speed Dial": Enter a speed dial number (1–300)."Multi-Point": Use [ ][ ] to select "No"."Terminal ID": Enter a Terminal ID (7 digits).4. Press [G].• A dialog box to confirm the saving of settings isdisplayed.5. Use [ ][ ] to select "Yes" and press [Enter].• The contact list screen is displayed.Note• To continue entering another contact, press[B] and repeat steps 3–5.6. Press [Home].• The Home screen is displayed.Registering a Multiple-partyContactNote• If you are using the KX-VC300, registering amultiple-party contact can only be done afterpurchasing an activation key card(KX-VCS301) to activate multiple-party videoconference calls. For details about theactivation key, contact your dealer.1. Press [Menu].• The Menu screen is displayed.2. Use [ ][ ] to select "New Contact" and press[Enter].• The contact list registration screen is displayed.3. Use [ ][ ] to select the following items for input:"Group/Site": Enter a name for the videoconference call (up to 24 characters)."Speed Dial": Enter a speed dial number (1–300)."Multi-Point": Use [ ][ ] to select "2 sites" or"3 sites".For "Site 1"/"Site 2"/"Site 3": Use the followingprocedure to select these from the contact listscreen.1. Use [ ][ ] to select "Site 1", "Site 2" or"Site 3".2. Press [Enter].• The contact list screen is displayed.3. Select a contact using [ ][ ].• You can use [ ][ ] or the numericbuttons of the remote control to select thedisplayed tab (Page 28).4. Press [Enter].22 NAT Traversal Service User’s Guide Document Version 2012-03Using KX-VC Series NAT Traversal ServiceUsing KX-VC Series NAT Traversal Service