Panasonic LB80U - XGA LCD Projector Operating Instructions Manual

Contents

ENGLISH - 22Basic OperationProjecting an image1. Switch on the connected devices.Press the play button of the required device.2. Detect the input signal automatically.3. Switch the aspect ratio automatically.1. Place the projector at the right angle from thescreen.2. Adjust the vertical angle of the projector.Press the front leg adjuster buttons and adjust thevertical angle.See “Front leg adjusters and throwing angle” onpage 16.3. Open the Zoom-Focus ring cover.See “Zoom-Focus ring cover” on page 12.4. Turn the zoom and focus rings to adjust theprojected image.You can confirm the adjusted effect with the TESTPATTERN in OPTION menu. See “TEST PATTERN”on page 36.5. Close the Zoom-Focus ring cover.See “Zoom-Focus ring cover” on page 12.Selecting the input signalNOTE:• If the SIGNAL SEARCH in OPTION menu isdeactivated, select the required input method bypressing the INPUT SELECT buttons of the remotecontrol or the INPUT SELECT button of the projectorseveral times. See “SIGNAL SEARCH” on page 35,“Switching the input signal” on page 24 or “INPUTSELECT button” on page 12.• See “ASPECT” on page 32.Positioning the imageScreenNOTE:• Do not touch the air exhaust port as this may causeburns or injury.• If keystone distortion occurs, see “KEYSTONE” onpage 32.• When you adjust the zoom after adjusting the focus,you may need to adjust the focus of the image again.Focus ringZoom ring