Panasonic LC2H Instructions Manual
Also see for LC2H preset: SpecificationsManualManual
    |
2 CounterLC2H Preset CounterRoHS complianceFeaturesHalf-size body(24 x 48 mm 0.945 × 1.890 in)equipped with the presetfunction• Preset function equipped in half size(24 × 48 mm 0.945 × 1.890 in)• 7-segment LCD with backlight for fantasticvisibilityThe backlight is switchable between green and red and the display canbe switched between lighting and flashing illumination when counting up• 8.7 mm 0.343 in Letter Height(Number of digits: 8 digits)• Counting Speed Switchable between 30 Hz and5 kHz• IP66 compliant for resistance against negativeenvironmental influences(only when panel surface uses rubber packing)• Includes reassuring lock mode and lock switchto prevent erroneous operation• Screw terminals are constructed to protectfingers to ensure safetyIP66 Mode selectablePRODUCT TYPESNo. digits Countingspeed Output mode Output Operatingvoltage Model No.8 digits30 Hz/5 kHzswitchable• Output maintain/hold count• Output maintain/over count• One shot/over count• One shot/recountTr (1a) 24 V DC LC2HP-FEW-B-DC24VOptions Mounting frame Use for waterproofing(front panel surface)ATH3803Rubber gasket ATH3804Note: Mounting frame and rubber gasket are not included.CHANGING THE PRESET VALUEIt is possible to change the preset value even during counting. However, be aware of the followingpoints.• If the preset value is changed to less than the count value with counting set to the addition direction, counting willcontinue until it reaches full scale, returns to "0 (zero)", and then reaches the new preset value. If the preset value ischanged to a value above the count value, counting will continue until the count value reaches the new preset value.• Suppose that the counter is preset to count down. Whether a preset count down value is smaller or larger than the countvalue, the counter counts down to "0 (zero)".If the preset value is changed to"0 (zero)", the counter will not complete count-up. It startscounting up when the counting value comes to "0 (zero)" again.• Addition (up-count) input when counting is set to the addition direction, counting will continue until full scale is reached,return to "0 (zero)" and then complete count-up.• Subtraction (down-count) input when counting is set to the subtraction direction, counting will continue until full scale"-9999999" is reached, and then the display will change to “ ”.* Refer to our website for details of product. |
Related manuals for Panasonic LC2H preset
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine