Panasonic LUMIX DMC-FX150 Operating Instructions Manual

Also see for LUMIX DMC-FX150: Brochure & specs Operating instructions Instrucciones básicas de funcionamiento Operating instructions Basic operating instructions

Contents

109VQT1T00OthersMessage DisplayConfirmation messages or error messages will be displayed on the screen in some cases.The major messages are described below as examples.[THIS MEMORY CARD IS LOCKED]> The Write-Protect switch on the SD Memory Card and the SDHC Memory Card aremoved to [LOCK]. Move the switch back to unlock it. (P15)[NO VALID PICTURE TO PLAY]> Record a picture or insert a card with a recorded picture and then play it.[THIS PICTURE IS PROTECTED]> Delete the picture after cancelling the protect setting. (P91)[THIS PICTURE CANNOT BE DELETED]/[SOME PICTURES CANNOT BE DELETED]• Pictures not based on the DCF standard cannot be deleted.> If you want to delete some pictures, format the card after saving necessary data on a PCetc. (P24)[NO ADDITIONAL SELECTIONS CAN BE MADE]• The number of pictures, which can be set at one time when [MULTI] has been selected for[DELETE MULTI] (P35), [FAVORITE] (P90), [TITLE EDIT] (P83), [TEXT STAMP] (P84) or[RESIZE] (P85) has been exceeded.> Reduce the number of pictures set, and then repeat the operation.• More than 999 favourites have been set.[CANNOT BE SET ON THIS PICTURE]• [TITLE EDIT], [TEXT STAMP] or [DPOF PRINT] cannot be set for pictures not based on theDCF standard.[NOT ENOUGH SPACE ON BUILT-IN MEMORY]/[NOT ENOUGH MEMORY ON THECARD]• There is no space left on the built-in memory or the card.– When you copy pictures from the built-in memory to the card (batch copy), the pictures arecopied until the capacity of the card becomes full.[SOME PICTURES CANNOT BE COPIED]/[COPY COULD NOT BE COMPLETED]• The following pictures cannot be copied.– When a picture with the same name as the picture to be copied exists in the copydestination. (Only when copying from a card to the built-in memory.)– Files not based on the DCF standard.• Moreover, pictures recorded or edited by other equipment may not be copied.[BUILT-IN MEMORY ERRORFORMAT BUILT-IN MEMORY?]• This message will be displayed when you formatted the built-in memory on a PC.> Format the built-in memory on the camera again. (P24) The data on the built-in memorywill be deleted.