Advanced (Recording pictures)- 70 -This takes pictures of a baby with a healthy complexion. When you use the flash, the lightfrom it is weaker than usual.It is possible to set different birthdays and names for [BABY1] and [BABY2]. You canselect to have these appear at the time of playback, or have them stamped on therecorded image using [TEXT STAMP] (P117).∫ Birthday/Name setting1 Press 3/4 to select [AGE] or [NAME] and then press 1.2 Press 3/4 to select [SET] and then press [MENU/SET].3 Enter the birthday or name.Birthday:2/1: Select the items (year/month/day).3/4: Setting.[MENU/SET]: Exit.Name: For details on how to enter characters, read the [TITLE EDIT] section on P115.• When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].• If [ON] is selected when the birthday or name has not been registered, the setting screenappears automatically.4 Press [MENU/SET] to finish.∫ To cancel [AGE] and [NAME]Select the [OFF] setting in step 2 of the “Birthday/Name setting” procedure.Note• The age and name can be printed out using the “PHOTOfunSTUDIO-viewer-” bundled softwareon the CD-ROM (supplied).• If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age orname will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].• The focus range becomes the same as macro mode. [5 cm (Wide)/30 cm (Tele) to ¶]• [INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO400].• If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at thelower left of the screen for about 5 seconds, along with the current date and time.• If the age is not properly displayed, check the clock and birthday settings.• If [QUALITY] is set to [ ] or[ ] and pictures are taken, the name is not registered on thepictures.• The birthday setting and name setting can be reset with [RESET].• The initial setting for [AF MODE] is [š].[BABY1]/[BABY2]
