12. Connecting to other equipment350Saving still pictures and motion pictures on aRecorderIf you insert card holding content recorded with this unit into aPanasonic recorder, you can dub the content to a Blu-ray Disc orDVD etc.Methods to export still pictures and motion pictures to otherdevices will vary depending on the file format. (JPEG, RAW,MPO, AVCHD, or MP4).• You cannot dub 4K burst files (MP4 format) with [Aspect Ratio] set to anoption other than [16:9] to hard disk drives, including those of Panasonic recorders. (As of May 2015)• See the operating instructions for the recorder about the details about copying and playingback.∫ Dubbing with non-compatible equipmentYou can dub the content played back using this unit to non-compatible equipment such asrecorders and video players by connecting this unit to the non-compatible equipment usingan AV cable (optional).Non-compatible equipment will be able to play back the content. This is convenient if youwish to pass around dubbed content. In this case, the content will be played back instandard rather than high-definition picture quality.1 Connect this unit with the recording equipment with an AV cable (optional).2 Start the playback of this unit.3 Start the recording on the recording equipment.• When ending the recording (copying), stop the playback on this unit after stopping therecording on recording equipment.• When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV Aspect] (P78) onthis unit to [4:3] before starting a copy.The image will be vertically long if you play back motion pictures copied with [16:9] setting on a[4:3] aspect TV.• Always use a genuine Panasonic AV cable (DMW-AVC1: optional).• See the operating instructions for the recording equipment for details about copying andplaying back.1Yellow: to the video input socket2White: to the audio input socketA Recording equipmentB AV cable (optional)C Insert the AV cable so that its [ ] markwill face the [ ] mark side of the camera.D Check the terminal.
