Panasonic LUMIX DMC-GF7KGN Operating Instructions Manual

Also see for Lumix DMC-GF7: Operating instructions for advanced features

33913. Others• With recording in a quiet environment, depending on the lenses used, the sound of apertureand focus actions may be recorded in motion pictures.Focus operation can be set to [OFF] in [Continuous AF] (P210).• While recording motion pictures, plugging the aperture of the microphone with a finger mayreduce the level of audio recording or audio may not record at all. Also be careful because theoperation sound of lenses can easily be recorded at this time.• Depending on the lens used, picture may be warped slightly or you may see colours along theedge depending on the zoom factor, due to the characteristics of the lens. Also, the peripheralsof the image might look warped because the perspective is enhanced when the wide angle isused. This is not a malfunction.• The Optical Image Stabiliser function of the interchangeable lens (H-FS12032/H-FS35100/H-PS14042) only works correctly with supported cameras.> When older Panasonic digital cameras (DMC-GF1/DMC-GH1/DMC-G1) are used,[Stabilizer] in the [Rec] menu cannot be set to [OFF].It is recommended to update the firmware of the digital camera at the following website.http://panasonic.jp/support/global/cs/dsc/download/(This Site is English only.)> When using this lens with another make of digital cameras, the Optical Image Stabiliserfunction will not work.(As of January 2015)For details, contact the respective company.• You can use Manual Focus with the interchangeable lens (H-FS12032) only if your model iscompatible with the lens.Refer to the support website below for details:http://panasonic.jp/support/global/cs/dsc/(This Site is English only.)In motion pictures, abnormal clicking and buzzing sounds are recorded.The recorded sound is very quiet.LensRecorded image may be warped, or nonexistent colour is surrounding thesubject.When the lens is attached to another digital camera, stabiliser function cannot beturned off or stabiliser function does not work.When the lens is attached to another digital camera, manual focus operationcannot be performed.