Panasonic LUMIX DMC-TZ15 Operating Instructions Manual

Also see for Lumix DMC-TZ11: Operating instructions

18 VQT1P98 VQT1P98 19Preparations2 Inserting battery and card(Continued) Preparations3 Setting the clockSet REC/PLAY switch to before turning on power.1 Turn on the power‘PLEASE SET THE CLOCK’ will be displayedwhen power is turned on for the first time.2 While this message is displayedPress [MENU/SET]3 Adjust year, month, date, timeSelectCLOCK SETCANCEL SELECT SET0 :00 1/JAN/2008D /M/YSelect to change date format• To cancel → Press .• [D/M/Y]12:34 1.JAN.2008• [M/D/Y]12:34 JAN. 1. 2008• [Y/M/D]2008. 1. 1 12:34Adjust4 SetPress [MENU/SET]• Turn on power again and check time display.(Time and date can be displayed by pressing[DISPLAY] several times.)REC/PLAY switchFailure to set the date and time will cause the date/time to be improperly printed whenprinting pictures in digital photo centre or when using ‘TEXT STAMP’ (P.73).Time is displayed in 24-hour format. Year can be set between 2000 and 2099.Clock settings will be saved for approx. 3 months even after battery is removed,provided a fully-charged battery was installed in camera for the 24 hours beforehand.To change time settingSelect ‘CLOCK SET’ fromSETUP menu (P.22),perform 3 and 4.To set local time atoverseas destination‘WORLD TIME’ (P.54)Remaining battery and memory capacity1010Pictures remaining(P.100)Displayed when no card inserted (pictures will be saved to built-in memory)Remaining battery (only when using battery)(flashes red)(Status indicator flashes when LCD monitor is off)Recharge or replace battery (P.16).When in operationCard or Built-in memory are Illuminated red.This means that an operation is in progress, such as the recording, reading, or deleting ofpictures. Do not turn off the power or remove the battery, card, or AC adaptor (optional)(this may cause damage to or loss of data).Picture save destination (cards and built-in memory)Pictures will be saved to a card if one is inserted, or to the built-in memory if not.Compatible memory cards (optional)The following SD standard-based cards (Panasonic brandrecommended)• SD memory cards (8 MB - 2 GB)• SDHC memory cards (4 GB - 16 GB)Can only be used with devices compatible with SDHCmemory cards.• Cards of over 4 GB may only be used if they have the SDHClogo.Always format cards with this camera. (P.27)If the switch on the card is set to ‘LOCK’, operations such as formatting, recording, anddeleting cannot be performed.Multimedia cards may also be used (for still pictures only)Built-in memory (approx. 50 MB)Internal memory is slower than SD memory card.Clipboard pictures (P.64) are saved to built-in memory.Pictures may be copied between cards and the built-in memory (P.81).Switch(LOCK)SDHC memory cardSDHC logoIt is recommended that you copy important pictures to your computer (aselectromagnetic waves, static electricity, or faults may cause data to be damaged).For model numbers and types,see http://panasonic.co.jp/pavc/global/cs (This Site is English only.)