Panasonic LUMIX DMC-TZ4 Operating Instructions Manual

Also see for LUMIX DMC-TZ4: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

24 VQT1P91 VQT1P91 25Preparations5 Using SETUP menu (Continued)ECONOMYTurn off LCD monitorand the camera while notin use to save batteryconsumption.POWER SAVEOFF/2MIN./ 5 MIN. /10MIN. :Automatically turn off the camera while not in use.• To restore → Press the shutter button halfway, or turn onthe power again.• Cannot be used in the following cases:When using AC adaptor (DMW-AC5E, optional), whenconnected to computer/printer, during motion picturerecording/playback, during slideshows• Settings fixed to ‘2 MIN.’ in ‘AUTO LCD OFF’ (below),‘5 MIN.’ in INTELLIGENT AUTO mode or CLIPBOARDmode, or ’10 MIN.’ while slideshow is paused.AUTO LCD OFFOFF /15SEC./30SEC. :LCD monitor is shut off if no operations are performed fora set period while recording. (Status indicator is illuminatedwhile monitor is off.)• Cannot be used in the following cases:When using INTELLIGENT AUTO mode, CLIPBOARDmode ,or AC adaptor (DMW-AC5E, optional), when menuscreen is displayed, when using self-timer setting orduring motion picture recording.• Monitor also shuts off during flash battery charging.• To restore → Press any button.AUTO REVIEWAutomatically displaypictures immediatelyafter taking them.OFF: No auto review1 SEC./ 2 SEC. : Automatically display for 1 or 2 seconds.HOLD: Auto review screen remains until a button (otherthan the display button) is pressedZOOM: Displays for 1 second, then at 4x zoom for 1second• Fixed to ‘2 SEC.’ in INTELLIGENT AUTO mode.• In ‘SELF PORTRAIT’, ‘HI-SPEED BURST’, and ‘MULTIASPECT ’ scene modes, ‘AUTO BRACKET’, ‘BURST’mode, or pictures with audio, auto review performedregardless of setting. ( DMC-TZ5 only)• Motion pictures cannot be automatically reviewed.ZOOM RESUMERemember the zoomratio when turning thecamera off.OFF / ON• Cannot be set when using ‘SELF PORTRAIT’ scenemode.NO.RESETReset image filenumbers.YES / NO• The folder number is updated and the file number startsfrom 0001.• A folder number between 100 and 999 can be assigned.Numbers cannot be reset once folder number reaches999. In this case, save all necessary pictures to yourcomputer, and format the built-in memory/card (P.27).• To reset folder number to 100:First, format the built-in memory or card, and reset thefile numbers using NO. RESET. Then, select ‘YES’ on thefolder number reset screen.• File numbers and folder numbers. (P.82, 97)RESETReset to the defaultsettings.RESET REC. SETTINGS?YES/NORESET SETUP PARAMETERS?YES/NO• Resetting SETUP parameters causes the following to bereset:Birthdays and names in ‘BABY’ and ‘PET’ scene modes,‘TRAVEL DATE’, ‘WORLD TIME’, ‘ZOOM RESUME’,‘FAVORITE’ in PLAYBACK menu (set to ‘OFF’), ‘ROTATEDISP.’ (set to ‘ON’).• Folder numbers and clock settings will not be reset.• Camera movement may be audible as the lens function isreset. This is not a fault.USB MODESelect communicationmethod for whenconnecting camera to acomputer or printer withUSB connection cable.SELECT ON CONNECTION :Select ‘PC’ or ‘PictBridge(PTP)’ each time you connect to acomputer or PictBridge-compatible printer.PictBridge (PTP) : Select when connecting to aPictBridge-compatible printerPC: Select when connecting to a computerItem Settings, notes Item Settings, notes