Panasonic LUMIX DMC-TZ6 Operating Instructions Manual

Also see for DMC-ZS3 - Lumix 10MP Digital Camera: Operating instructions Instrucciones de funcionamiento Basic operating instructions Operating instructions Operating instructions

Contents

98 VQT2C11 VQT2C11 99Using with your PC Some computers can read directly from the camera’s memory card.For details, see the manual for your computer.Still/motion pictures can be copied from the camera to your computer by connecting thetwo together.• Copied pictures can then be printed out or sent by e-mail using the ‘PHOTOfunSTUDIO’software on the CD-ROM (supplied).Computer specificationsWindows Macintosh98/98SE Me 2000/XP/Vista OS 9/OS XCan I usePHOTOfunSTUDIO? No Yes 1 NoCan I copy AVCHD Litemotion pictures to mycomputer?No Yes 2 NoCan I copy still pictures andMotion JPEG motion picturesfrom my camera to mycomputer via USB cable?YesYesOS 9.2.2OS X (10.1 - 10.5)Do I need to install USBdrivers? Yes No –• USB connection cables cannot be used with Windows 95, Mac OS 8.x, or older versionsof either, but still/motion pictures may still be copied with compatible SD memory cardreader/writers.1 Internet Explorer 6.0 or above must be installed.Correct playback and operation depends on your computer’s environment and cannotalways be guaranteed.2 Always use ‘PHOTOfunSTUDIO’ when copying AVCHD Lite motion pictures.Copying still pictures and motion picturesSet-up:• Use a fully charged battery, or connect the AC adaptor (optional) and Multi ConversionAdaptor (DMW-MCA1, optional). (P.101)• Card : Insert card and set mode dial to any exceptBuilt-in memory: Remove cardTo cancel connection Click ‘Safely Remove Hardware’ in the WindowsSystem Tray → disconnect USB connection cable→ turn off camera power → disconnect AC adaptorTurn on power of bothcamera and computerConnect camera tocomputerPlease make sure you use thesupplied USB connection cable.Use of cables other than the suppliedUSB connection cable may causemalfunction.Select ‘PC’ on the cameraA message may be displayed on screenif ‘USB MODE’ (P.22) is set to ‘PictBridge(PTP)’. Select ‘CANCEL’ to close thescreen, and set ‘USB MODE’ to ‘PC’.Operate with yourcomputerCheck socket direction and insert straight in.(Damage to socket shape can lead to faulty operation.)ACCESS (sending data)• Do not disconnect the USB connectioncable while ‘ACCESS’ is displayed.USB connection cable(always use cable supplied)