Panasonic Lumix DC-G9 Operating Instructions Manual

Also see for Lumix DC-G9: Operating instructions for advanced features Basic operating instructions Owner's manual Basic operating instructions

Contents

Panasonic Lumix DC-G9 Operating Instructions Manual Manual pdf 111 page image

111Others(ENG) DVQX1333Message DisplayConfirmation messages or error messages will be displayed on the screen in some cases.• Please also refer to the “Operating Instructions for advanced features (PDF format)”, whichdescribes more detailed information.[Some pictures cannot be deleted]/[This picture cannot be deleted]• This feature can only be used with pictures that comply with the DCF standard.Perform formatting (P19) on this unit after saving necessary data on a PC, etc.[Memory Card ErrorFormat this card?]• It is a format that cannot be used with this unit.– Insert a different card.– Format the card again with the camera after saving necessary data on a PC etc. (P19) Datawill be deleted.[The lens is not attached properly. Do not push lens release button while lens isattached.]• Detach the lens once, and then attach it again without pressing the lens release button. (P17)Turn this unit on again, and if it is still displaying, contact the dealer.[Memory Card Error]/[This memory card cannot be used]• Use a card compatible with this unit. (P9)[Insert SD card again]/[Try another card]• An error has occurred accessing the card. Insert the card again.• Insert a different card.[Read Error/Write ErrorPlease check the card]• It has failed to read or write data. Remove the card after turning this unit off. Insert the cardagain, turn this unit on, and try to read or write the data again.• The card may be broken.• Insert a different card.[This battery cannot be used]• Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonicbattery is used, contact the dealer or Panasonic.• If the battery terminal is dirty, clean it and remove any objects.[Failed to connect wireless access point]/[Connection failed]/[No destination found]• The wireless access point information set on this unit is wrong. Check the authentication type,encryption type, and encryption key.• Radio waves from other devices may block the connection to a wireless access point. Checkthe status of other devices that are connected to the wireless access point as well as the statusof other wireless devices.