Others89Troubleshooting1: The power does not turn on.1-1: Are the battery and the AC adaptorcorrectly connected? Check theconnection.1-2: Is the battery sufficiently charged?Use a battery that has beensufficiently charged.2: As the power is turned on, it turnsoff immediately.2-1: Is the battery charge insufficient tooperate the camera? Charge thebattery or replace it with chargedone.2-2: Has condensation occurred?Carrying the digital camera from acold place to a warm place couldcause condensation to form insidethe camera. Wait until condensationdisappears.3: The image cannot be recorded.3-1: Is the Memory Card inside?3-2: Is the mode dial correctly set ?Check it.3-3: There is no memory capacity left onthe card. Before recording, deletesome images.4: The image is not displayed on theLCD monitor.4: Is the LCD monitor set to OFF?5: The LCD monitor is too bright ordark.5: Adjust the brightness of the LCDmonitor.6: Flash does not light.6: The flash mode is set to forced OFF.Change the flash mode.7: The display or images on the LCDmonitor are not focused.7: Set the mode dial to the modecorresponding to the distance to thesubject.8: The image will not play back.8-1: Is the Memory Card inside?8-2: There is no image in the MemoryCard.8-3: The mode dial is not set to playback[ ].9: The image is not displayed on thetelevision.9-1: Is the camera correctly connectedwith the TV? Check it.9-2: Set the TV to video input mode.10: When connecting to a PC, imagescannot be transferred.10-1:Check that the camera is correctlyconnected to the PC.10-2:Is the camera correctly recognizedby the PC?11: The clock setting is reset.11-1:If you do not use the camera for along time, the clock setting may bereset. When the message [PLEASESET THE CLOCK] appears, set theclock again.11-2:When you take a picture beforesetting the clock, [0:00 0. 0. 0] isrecorded.
