Panasonic Lumix DMC-F2 Basic Operating Instructions Manual

Also see for Lumix DMC-F2: Specifications Basic operating instructions Operating instructions Operating instructions

Contents

Panasonic Lumix DMC-F2 Basic Operating Instructions Manual Manual pdf 3 page image

3(ENG) VQT2T54Caution for AC Mains LeadFor your safety, please read the followingtext carefully.This appliance is supplied with a mouldedthree pin mains plug for your safety andconvenience.A 5-ampere fuse is fi tted in this plug.Should the fuse need to be replaced pleaseensure that the replacement fuse has arating of 5-ampere and that it is approvedby ASTA or BSI to BS1362.Check for the ASTA mark or the BSImark on the body of the fuse.If the plug contains a removable fuse coveryou must ensure that it is refi tted when thefuse is replaced.If you lose the fuse cover the plug mustnot be used until a replacement cover isobtained.A replacement fuse cover can bepurchased from your local dealer.CAUTION!IF THE FITTED MOULDED PLUGIS UNSUITABLE FOR THE SOCKETOUTLET IN YOUR HOME THEN THEFUSE SHOULD BE REMOVED ANDTHE PLUG CUT OFF ANDDISPOSED OF SAFELY.THERE IS A DANGER OF SEVEREELECTRICAL SHOCK IF THE CUTOFF PLUG IS INSERTED INTO ANY13-AMPERE SOCKET.If a new plug is to be fi tted please observethe wiring code as stated below.If in any doubt please consult a qualifiedelectrician.IMPORTANTThe wires in this mains lead are colouredin accordance with the following code:Blue: Neutral, Brown: Live.As these colours may not correspondwith the coloured markings identifying theterminals in your plug, proceed as follows:The wire which is coloured Blue must beconnected to the terminal which is markedwith the letter N or coloured Black or Blue.The wire which is coloured Brown must beconnected to the terminal which is markedwith the letter L or coloured Brown or Red.WARNING: DO NOT CONNECT EITHERWIRE TO THE EARTH TERMINAL WHICHIS MARKED WITH THE LETTER E, BYTHE EARTH SYMBOL OR COLOUREDGREEN OR GREEN/YELLOW.THIS PLUG IS NOT WATERPROOF–KEEP DRY.Before useRemove the connector cover.How to replace the fuseThe location of the fuse differ according tothe type of AC mains plug (figures A and B).Confi rm the AC mains plug fi tted and followthe instructions below. Illustrations maydiffer from actual AC mains plug.1. Open the fuse cover with a screwdriver.Figure A Figure BFuse cover2. Replace the fuse and close or attach thefuse cover.Figure AFuse(5 ampere)Figure BFuse(5 ampere)