Panasonic Lumix DMC-F2 Operating Instructions Manual

Also see for DMC-FS42 Lumix: Basic operating instructions Operating instructions Basic operating instructions Operating instructions Basic operating instructions

Contents

Preparation- 1 -Inserting/Removing the Battery/Card (Optional)• Check that the camera is turned off.• We recommend using a Panasonic card.1 Slide the release lever in the direction ofthe arrow and open the card/battery door.• Always use genuine Panasonic batteries.• If you use other batteries, we cannotguarantee the quality of this product.2 Battery: Insert it fully being careful aboutthe direction for insert. Pull the lever Ain the direction of the arrow to removethe battery. Card: Push it fully until itclicks being careful about the directionfor insert. To remove the card, push thecard until it clicks, then pull the card outupright.B Do not touch the connection terminals of thecard.• The card may be damaged if it is not fully inserted.3 1: Close the card/battery door.2: Slide the release lever in the directionof the arrow.• If the card/battery door cannot be completelyclosed, remove the card, check its direction andthen insert it again.Note• Remove the battery after use. Store the removed battery in the battery case (supplied).• Do not remove the battery until the LCD monitor turns off as the settings on the cameramay not be stored properly.• The supplied battery is designed only for the camera. Do not use it with any otherequipment.• Before removing the card or battery, turn the camera off. (Otherwise, this unit may nolonger operate normally and the card itself may be damaged or the recorded picturesmay be lost.)