Panasonic Lumix DMC-FH2 Basic Operating Instructions Manual

VQT3D43 (ENG)4∫ Cautions for Use• Do not use any other AV cables except the supplied one.• Do not use any other USB connection cables except the supplied one.Keep this unit as far away as possible from electromagnetic equipment(such as microwave ovens, TVs, video games etc.).• If you use this unit on top of or near a TV, the pictures and/or sound on this unitmay be disrupted by electromagnetic wave radiation.• Do not use this unit near cell phones because doing so may result in noiseadversely affecting the pictures and/or sound.• Recorded data may be damaged, or pictures may be distorted, by strongmagnetic fields created by speakers or large motors.• Electromagnetic wave radiation generated by microprocessors may adverselyaffect this unit, disturbing the pictures and/or sound.• If this unit is adversely affected by electromagnetic equipment and stopsfunctioning properly, turn this unit off and remove the battery or disconnect ACadaptor (DMW-AC5G; optional). Then reinsert the battery or reconnect ACadaptor and turn this unit on.Do not use this unit near radio transmitters or high-voltage lines.• If you record near radio transmitters or high-voltage lines, the recorded picturesand/or sound may be adversely affected.∫ How to replace the FuseThe location of the fuse differ according to the type of AC cable (figures Aand B).Confirm the AC cable fitted and follow the instructions below.Illustrations may differ from actual AC cable.1 Open the fuse coverwith a screwdriver.2 Replace the fuse andclose or attach the fusecover.Fuse coverFigure A Figure BFigure A Figure BFuse(5 ampere)Fuse(5 ampere)