Panasonic Lumix DMC-FP3 Basic Operating Instructions Manual

Also see for Lumix DMC-FP3: Specifications Basic operating instructions Operating instructions Operating instructions Basic operating instructions

Contents

4 VQT2L57 (ENG)■ About the battery chargerCAUTION!• DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-INCABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT ISWELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIREHAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANYOTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.• DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITHNEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.• DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTEDCANDLES, ON THE UNIT.• DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY MANNER.• The battery charger is in the standby condition when the AC power supply cordis connected. The primary circuit is always “live” as long as the power cord isconnected to an electrical outlet.■ Cautions for Use• When using an AC adaptor, use the AC cable supplied with the AC adaptor.• Do not use any other AV cables except the supplied one.• Do not use any other USB connection cables except the supplied one.In the event of abnormal operation (e.g. if the unit emits smoke or an unusualsmell), immediately stop operating the unit and consult the Panasonic CustomerCare Centre on 132600.Keep the camera as far away as possible from electromagnetic equipment(such as microwave ovens, TVs, video games etc.).• If you use the camera on top of or near a TV, the pictures and sound on thecamera may be disrupted by electromagnetic wave radiation.• Do not use the camera near cell phones because doing so may result in noiseadversely affecting the pictures and sound.• Recorded data may be damaged, or pictures may be distorted, by strongmagnetic fields created by speakers or large motors.• Electromagnetic wave radiation generated by microprocessors may adverselyaffect the camera, disturbing the pictures and sound.• If the camera is adversely affected by electromagnetic equipment and stopsfunctioning properly, turn the camera off and remove the battery or disconnectAC adaptor (DMW-AC5G; optional). Then reinsert the battery or reconnect ACadaptor and turn the camera on.Do not use the camera near radio transmitters or high-voltage lines.• If you record near radio transmitters or high-voltage lines, the recorded picturesand sound may be adversely affected.