VQT1W6522Preparation• When you connect the camera to a TV, the volume of the TV speakers does not change.• High angle mode is also canceled if you turn the camera off or [POWER SAVE] is activated.• The brightness of the pictures displayed on the LCD monitor is increased so some subjectsmay appear different from real life on the LCD monitor. However, this does not affect therecorded pictures.• The LCD monitor automatically returns to normal brightness after 30 seconds when recordingin Power LCD mode. Press any button to make the LCD monitor bright again.• If the screen is difficult to see because of light shining on it, use your hand or another object toblock the light.• The number of recordable pictures decreases in Auto Power LCD mode, Power LCD mode andHigh angle mode.• [AUTO POWER LCD] and [HIGH ANGLE] cannot be selected in Playback mode.r [BEEP]This allows you to set the beep and shutter sound.r [BEEP LEVEL]:[s] (Muted)[t] (Low)[u] (High)[SHUTTER VOL.]:[ ] (Muted)[ ] (Low)[ ] (High)[BEEP TONE]:[ ]/[ ]/[ ][SHUTTER TONE]:[ ]/[ ]/[ ]u [VOLUME] Adjust the volume of the speaker to any of 7 levels.[MONITOR] Adjust the brightness of the LCD monitor in 7 steps.[LCD MODE]These menu settings make it easier to see the LCD monitor whenyou are in bright places or when you are holding the camera highabove your head.[OFF]„ [AUTO POWER LCD]:The brightness is adjusted automatically depending on how brightit is around the camera.… [POWER LCD]:The LCD monitor becomes brighter and easier to see even whentaking pictures outdoors.Å [HIGH ANGLE]:The LCD monitor is easier to see when taking pictures with thecamera held high above your head.[DISPLAY SIZE] Change the display size of some icons and menu screens.[STANDARD]/[LARGE][FOCUS ICON] Change the focus icon.[ ]/[ ]/[ ]/[ ]/[ ]/[ ]1 2 3 1 2 3LCD