Panasonic Lumix DMC-FZ28 Operating Instructions Manual

Also see for DMC FZ28K - Lumix Digital Camera: Instrucciones básicas de funcionamiento

Contents

VQT1S36114Connecting to other equipment∫ Connection in the PTP mode (WindowsR XP, Windows VistaR and Mac OS X only)Set [USB MODE] to [PictBridge(PTP)].Data can now be read only from the card into the PC.• When there are 1000 or more pictures on a card, the pictures may not be imported in the PTPmode.Printing the PicturesIf you connect the camera to a printer supporting PictBridge, you can select the pictures tobe printed out and instruct that printing be started on the camera’s LCD monitor.Preparations:Turn on the camera and the printer.Remove the card before printing the pictures in the built-in memory.Perform the print quality and other settings at the printer before printing the pictures.Connect the camera to a printer via the USB connection cable A(supplied).Press 3/4 to select [PictBridge(PTP)], and thenpress [MENU/SET].Note• Do not use any other USB connection cables except the supplied one.Use of cables other than the supplied USB connection cable may causemalfunction.A USB connection cable (supplied)• Check the directions of the connectors, and plug them straight in or unplug them straight out.(Otherwise the connectors may be bent out of shape which will cause trouble.)B Align the marks, and insert.C AC adaptor (DMW-AC7PP; optional)• Use a battery with a sufficient battery power or the AC adaptor (DMW-AC7PP; optional). If theremaining battery power becomes low during USB connection, the alarm beeps. If this happensduring printing, stop printing at once. If not printing, disconnect the USB connection cable.• When the camera is connected to the printer, the cable disconnect prohibit icon [å] appears.Do not disconnect the USB cable while [å] is displayed.