Panasonic Lumix DMC-FZ35 Operating Instructions Manual

Also see for Lumix DMC-FZ35: Operating instructions Operating instructions Instrucciones básicas de funcionamiento Specifications Basic operating instructions

Contents

VQT2E91 (ENG)4∫ Care of the camera• Do not strongly shake or bump the camera by dropping or hitting it. Do not subject tostrong pressure.The camera may malfunction, recording pictures may become impossible, or the lens, the LCDmonitor or the external case may be damaged.• Do not touch the lens or the sockets with dirty hands. Also, be careful not to allowliquids, sand and other foreign matter to get into the space around the lens, buttons etc.• Retract the lens before carrying the camera or playing back pictures.• Be particularly careful in the following places as they may cause this unit tomalfunction.– Places with a lot of sand or dust.– Places where water can come into contact with this unit such as when using it on a rainy dayor on a beach.• This camera is not waterproof. If water or seawater splashes on the camera, use a drycloth to wipe the camera body carefully.If the unit does not operate normally, please contact the dealer where you purchased thecamera or the repair service centre.∫ About Condensation (When the lens or the Viewfinder is fogged up)• Condensation occurs when the ambient temperature or humidity changes. Be careful ofcondensation since it causes lens stains, fungus and camera malfunction.• If condensation occurs, turn the camera off and leave it for about 2 hours. The fog willdisappear naturally when the temperature of the camera becomes close to the ambienttemperature.∫ How to replace the FuseThe location of the fuse differ according to the type of AC cable (figures A and B).Confirm the AC cable fitted and follow the instructions below.Illustrations may differ from actual AC cable.1 Open the fuse cover with ascrewdriver.2 Replace the fuse and close or attachthe fuse cover.Fuse coverFigure A Figure BFigure A Figure BFuse(5 ampere)Fuse(5 ampere)