Panasonic Lumix DMC-G1K Operating Instructions Manual

Also see for DMC-G1K - Lumix Digital Camera: Operating instructions Operating instructions Operating instructions Operating instructions Instrucciones de funcionamiento

Contents

Panasonic Lumix DMC-G1K Operating Instructions Manual Manual pdf 142 page image

VQT1U44142OthersMessage DisplayConfirmation messages or error messages will be displayed on the screen in some cases.The major messages are described below as examples.[THIS MEMORY CARD IS LOCKED]> The Write-Protect switch on the SD Memory Card and the SDHC Memory Card aremoved to [LOCK]. Move the switch back to unlock it. (P25)[NO VALID PICTURE TO PLAY]> Record a picture or insert a card with a recorded picture and then play it.[THIS PICTURE IS PROTECTED]> Delete the picture after cancelling the protect setting. (P115)[THIS PICTURE CANNOT BE DELETED]/[SOME PICTURES CANNOT BE DELETED]• Pictures not based on the DCF standard cannot be deleted.> If you want to delete some pictures, format the card after saving necessary data on a PCetc. (P35)[NO ADDITIONAL SELECTIONS CAN BE MADE]• The number of pictures, which can be set at one time when [MULTI] has been selected for[DELETE MULTI] (P54) or [FAVORITE] (P112) has been exceeded.> Reduce the number of pictures set, and then repeat the operation.• More than 999 favourites have been set.[CANNOT BE SET ON THIS PICTURE]• [DPOF PRINT] cannot be set for pictures not based on the DCF standard.[MEMORY CARD ERRORFORMAT THIS CARD?]• This card has a format which is not recognised by the camera.> Format the card again with the camera after saving necessary data on a PC etc. (P35)[PLEASE CHECK THAT THE LENS IS ATTACHED CORRECTLY]• Check that the lens is attached correctly and then turn the camera off and on.> If the message persists, contact the dealer or your nearest Service Centre.[MEMORY CARD PARAMETER ERROR]> Use a card compatible with this unit. (P25)• You can only use an SDHC Memory Card if using cards with 4 GB or more capacity.[MEMORY CARD ERRORPLEASE CHECK THE CARD]• An error has occurred accessing the card.> Insert the card again.• Or try with a different card.