73VQT2S30Advanced (Recording pictures)• In the Quick Menu (P34) while in button operation, if set to [ ] (LCD monitor style), exposurecompensation can be set with 3/4 after selecting to display exposure compensation with2/1 or the rear dial.• In the Quick Menu (P34) while in button operation, if set to [ ] (viewfinder style), afterselecting the Exposure Compensation display using the rear dial or 2/1, pressing the rear dialor [MENU/SET] will allow you to compensate the exposure with the rear dial or 2/1.[REC] Mode:Taking Pictures using Burst ModePictures are taken continuously while the shutter button is pressed.Select the ones you really like from among the pictures you have taken.Set the drive mode lever to [ ].Focus on the subject and take a picture.A When Burst Mode is set to high speed [H].• Hold down the shutter button fully to activate theBurst Mode.∫ Changing the burst speed1 Select [BURST RATE] in the [REC] Mode menu. (P32)2 Press 3/4 to select the burst speed and then press[MENU/SET].3 Press [MENU/SET] to close the menu.• You can also press the shutter button halfway to close the menu.¢1 Number of recordable pictures¢2 Pictures can be taken until the capacity of the card becomes full. However the burst speedwill become slower halfway. The exact timing of this depends on the aspect ratio, the picturesize, the setting for the quality and the type of card used.[H](High speed)[M](Middle speed)[L](Low speed)Burst speed (pictures/second) 3.2 2.6 2Live View during Burst Mode None Available Available¢1 With RAW files 4 to 7¢2Without RAW files Depends on the remaining capacity of the card¢2A
