Recording- 90 -∫ Displaying the MF Assist• This is displayed by rotating the focus ring or touching the screen. (In [MINIATURE EFFECT] inCreative Control Mode, you cannot display by touching the screen)• It can also be displayed by pressing 2 to display the setup screen for the enlarged area,deciding the area to enlarge using the cursor button, and then pressing [MENU/SET].∫ Changing the display of the MF AssistYou can switch the magnification factor between approx. 4 times, 5 times and 10 times. Inthe case of 4 times magnification, the central region is magnified. In the case of 5 and 10times magnification, the whole screen is magnified.• You can change the magnification by touching [ ]/[ ] or rotating the control dial.∫ Moving the enlarged area• The enlarged area can be moved by dragging the screen (P10), or pressing the cursor button.• The following will return the MF assistance to the original position.– When the [FOCUS MODE] is set to other than [MF]– Changing [ASPECT RATIO] or [PICTURE SIZE]– Turning the camera off– When [ ] is pressed in the setup screen for the enlarged area∫ Closing the MF Assist• It will close when the shutter button is pressed halfway.• It will also close by touching the [EXIT] on the screen or pressing [MENU/SET].• When displayed by rotating the focus ring, it is closed approximately 10 seconds after theoperation is stopped.Note• The MF Assist is disabled when using the Digital Zoom or recording motion pictures.• MF Assist or MF guide may not display depending on the lens used, but you can display MFAssist by direct operation of the camera, using the touch panel or a button.MF ASSIST
