34713. Others• Disconnect the USB connection cable. Connect it again while the card is inserted in thecamera.• If there are two or more USB terminal on a single PC, try connecting the USB connection cableto another USB terminal.• Check if your PC is compatible with SDXC memory cards.http://panasonic.net/avc/sdcard/information/SDXC.html• A message prompting to format the card may be displayed when connecting, but do not format.• If the [Access] displayed on the monitor does not disappear, disconnect the USB connectioncable after turning this unit off.• Pictures cannot be printed using a printer that does not support PictBridge.> Set to [PictBridge(PTP)] in [USB Mode]. (P65, 311)• When using a printer with a Cropping or borderless printing function, cancel this function beforeprinting.(For details, refer to the operating instructions for the printer.)• When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can beprinted.• Since aspect ratio of a panorama picture differs from normal pictures, it may not always bepossible to print it correctly.> Please use a printer that supports panorama pictures.(For details, please see the operating instructions of your printer.)> We recommend using the “PHOTOfunSTUDIO” software on the DVD (supplied) to adjustthe size of the still picture to the print paper size.• If the camera is shaken, it may cause the shutter to close. This is not a malfunction. Do not putyour finger in the mount. Turning on the camera will re-open the shutter.• Depending on the lens you attach, it may move inside and create a sound. This is not amalfunction.The card is not recognised by the PC.The card is not recognised by the PC.(SDXC memory card is used.)The picture cannot be printed when the camera is connected to a printer.The ends of the pictures are cut at printing.The panorama picture is not printing correctly.OthersThe shutter remains closed when the camera is turned off (including SleepMode).When I shake the camera, I hear a rattling sound from the attached lens.
