89VQT2A61Advanced (Recording pictures)• You can register 2 settings. ([MY FILM 1] and [MY FILM 2])(After registering, the film mode name that was registered previously is displayed.)• [STANDARD] is registered in [MY FILM 1] and [MY FILM 2] at the time of purchase.Note• Noise may become visible when you take pictures in dark places. To avoid picture noise, werecommend setting [NOISE RED.] towards [_] or setting the items except [NOISE RED.]towards [`] to take pictures.• If you adjust a film mode, [_] is displayed beside the film mode icon on the LCD monitor/Viewfinder.• You cannot adjust [SATURATION] in the black and white settings in Film Mode.• Film Mode cannot be adjusted in the Intelligent Auto Mode, Advanced Scene Mode and SceneMode.It will take pictures changing the type of film in accordance with the setting every time theshutter button is pressed. (Up to 3 pictures)• You can also set from the Quick Menu. (P32)Press 2/1 to select [MULTI FILM].Select either [MULTI FILM 1], [MULTI FILM 2], or[MULTI FILM 3] with 3/4, and then select the filmto be set for each with 2/1.• You can also use the front dial to set.• [OFF] can be selected only for [MULTI FILM 3].Press [MENU/SET] to set.• You can also press the shutter button halfway to set.Focus on the subject and take a picture.• It will continuously take pictures by keeping the shutter button pressed when it is set toBurst Mode. (Up to 3 pictures)Item Effect[CONTRAST][r] Increases the difference between the brightness and thedarkness in the picture.[s] Decreases the difference between the brightness and thedarkness in the picture.[SHARPNESS] [r] The picture is sharply defined.[s] The picture is softly focused.[SATURATION] [r] The colors in the picture become vivid.[s] The colors in the picture become natural.[NOISE RED.][r] The noise reduction effect is enhanced. Picture resolution maydeteriorate slightly.[s] The noise reduction effect is reduced. You can obtain pictureswith higher resolution.Multi Film Bracket
