157VQT2A73Connecting to other equipmentPrinting the PicturesIf you connect the camera to a printer supporting PictBridge, you can select the pictures tobe printed out and instruct that printing be started on the camera’s LCD monitor.Connect the camera to a printer via the USB connection cable A(supplied).• When the camera is connected to the printer, the cable disconnect prohibit icon [å]appears. Do not disconnect the USB cable while [å] is displayed.Press 3/4 to select [PictBridge(PTP)], and thenpress [MENU/SET].Note• Do not use any other USB connection cables except the supplied one. Use of cables other thanthe supplied USB connection cable may cause malfunction.• Turn the camera off before connecting or disconnecting the AC adaptor (P25).• Before inserting or removing a card, turn the camera off, and disconnect the USB connectioncable.• HDMI connection is disabled and connection with the USB connection cable will take prioritywhen you connect the USB connection cable while the HDMI mini cable is connected (P149).• Motion pictures recorded with [AVCHD] cannot be printed.Preparations: Turn on the camera and the printer.Perform the print quality and other settings at the printer before printing thepictures.A USB connection cable (supplied)• Check the directions of the connectors, and plug them straight in or unplug them straight out.(Otherwise the connectors may be bent out of shape which will cause trouble.)B Align the marks, and insert.C AC adaptor (supplied)• Use a battery with a sufficient battery power or the AC adaptor (P25). If the remaining batterypower becomes low while the camera and the printer are connected, the status indicator blinksand the alarm beeps. If this happens during printing, stop printing at once. If not printing,disconnect the USB connection cable.USB MODESELECT SETPLEASE SELECTTHE USB MODEPictBridge(PTP)PCMENU
