2078. Stabilizer, Zoom and FlashApplicable modes:Set the flash to match the recording.1 Select the menu. (P57)2 Press 3/4 to select the item and then press [MENU/SET].¢ It can be set only when [Wireless] in [Flash] is set to [OFF] and [Firing Mode] is set to [TTL].• Some flash modes may not be available depending on the external flash’s settings.The flash is activated twice.The interval between the first and second flash is longer when [ ] or [ ] isset. The subject should not move until the second flash is activated.• The Red-Eye Reduction effect differs between people. Also, if the subject was far away fromthe camera or was not looking at the first flash, the effect may not be evident.∫ Correcting red eyesApplicable modes:When Red-Eye Reduction ([ ], [ ]) is selected, Red-Eye Removal is performedwhenever the flash is used. The camera automatically detects red-eye and corrects thepicture.Settings: [ON]/[OFF]• [ ] is displayed on the icon when it is set to [ON].• Under certain circumstances, red-eye cannot be corrected.Changing Flash Mode> [Rec] > [Flash] > [Flash Mode]‰ ([Forced Flash On])([Forced On/Red-Eye])¢The flash is activated every timeregardless of the recording conditions.• Use this when your subject is back-litor under fluorescent light.([Slow Sync.])([Slow Sync./Red-Eye])¢When taking pictures against a darkbackground landscape, this feature willslow the shutter speed when the flash isactivated. Dark background landscape willappear brighter.• Use this when you take pictures ofpeople in front of a dark background.• Using a slower speed can cause motion blur. Using a tripodcan enhance your photos.Œ ([Forced Flash Off])The flash is not activated in any recording conditions.• Use this when you take pictures in places where the use offlash is not permitted.> [Rec] > [Red-Eye Removal]MENUMENU
