Panasonic Lumix DMC-LS70P Service Manual

2DMC-LS60PLDMC-LS60EBDMC-LS60EEDMC-LS60EFDMC-LS60EGDMC-LS60EGMDMC-LS60GCDMC-LS60GKDMC-LS60GNVol. 1Colour(S)...................Silver Type (except DMC-LS75PC)(K)...................Black Type (only DMC-LS75P/PC/EB/EE/EF/EG/EGM)TABLE OF CONTENTS PAGE PAGE1 Safety Precaution -------------------------------------------------31.1. General Guidelines ----------------------------------------31.2. Leakage Current Cold Check ---------------------------31.3. Leakage Current Hot Check (See Figure 1.)--------31.4. How to Discharge the Capacitor on Flash TopPCB------------------------------------------------------------42 Warning --------------------------------------------------------------52.1. Prevention of Electro Static Discharge (ESD)to ElectrostaticallySensitive (ES) Devices -----------52.2. How to Replace the Lithium Battery-------------------63 Service Navigation------------------------------------------------73.1. Introduction --------------------------------------------------73.2. General Description About Lead Free Solder(PbF) ----------------------------------------------------------73.3. Important Notice 1:(Other than U.S.A. andCanadian Market) ------------------------------------------73.4. How to Define the Model Suffix (NTSC or PALmodel)---------------------------------------------------------84 Specifications ---------------------------------------------------- 115 Location of Controls and Components------------------ 126 Service Mode ----------------------------------------------------- 146.1. Error Code Memory Function ------------------------- 146.2. Confirmation of Firmware Version ------------------- 177 Service Fixture & Tools --------------------------------------- 187.1. Service Fixture and Tools ------------------------------ 187.2. When Replacing the Main PCB ---------------------- 197.3. Service Position ------------------------------------------ 198 Disassembly and Assembly Instructions --------------- 208.1. Disassembly Flow Chart-------------------------------- 208.2. PCB Location---------------------------------------------- 208.3. Disassembly Procedure -------------------------------- 218.4. Disassembly Procedure for the Lens --------------- 258.5. Assembly Procedure for the Lens ------------------- 278.6. Removal of the CCD Unit ------------------------------ 308.7. Removal of the Focus Motor -------------------------- 318.8. The Applyment of Grease Method------------------- 319 Measurements and Adjustments -------------------------- 329.1. Matrix Chart for Replaced Part and NecessaryAdjustment ------------------------------------------------ 3210 Maintenace-------------------------------------------------------- 3310.1. Cleaning Lens and LCD Panel ----------------------- 33