- 108 -Wi-FiSetting up the connection with [Wi-Fi Wizard]By a single operation, you can make all the settings required for using the Wi-Fi functions.• If you are using this unit for the first time following the purchase, the Wi-Fi setting screen is displayedafter the clock setting. (P23)• You can also start the Wi-Fi wizard by selecting [Wi-Fi Wizard] in the [Wi-Fi Setup] menu. (P125)Proceed with the setting by following the on-screen instructions.• Set in the following order.• Exit the menu after the setting.Note• Functions that have not been set up for a Wi-Fi connection can also be set by selecting therespective function in the [Wi-Fi] menu.Functions Description of settings[Smart Transfer](P122)1 Connect to a wireless access point.• Refer to “ [Access Point] ” on P125 for the connection method.2 Set the destination.• If you have selected [PC], create a folder used for receiving the data onthe PC in advance. Refer to P113 for details.• When [Cloud Sync. Service] is selected, “LUMIX CLUB” registration isrequired. Refer to “ [LUMIX CLUB]” on P129.[Remote Control](P109)Connect to the smartphone.• In [Wi-Fi Wizard], you can directly connect this unit and the smartphone byusing this unit as a wireless access point.• Refer to P110 for details on connection method.[Send Image](P117)1 Connect to a wireless access point.• Refer to “ [Access Point] ” on P125 for the connection method.2 Set the destination.• If you have selected [PC], create a folder used for receiving the data onthe PC in advance. Refer to P113 for details.• When [Cloud Sync. Service], [WEB service] or [External] in [AV device]is selected, “LUMIX CLUB” registration is required. Refer to “ [LUMIXCLUB]” on P129.• Refer to P115 when using WEB services.• For the settings for [External] in [AV device], refer to “ [External AVdevice]” on P133.[Wireless TVPlayback](P120)1 Connect to a wireless access point.• Refer to “ [Access Point] ” on P125 for the connection method.2 Set the destination.[Wireless Print](P121)1 Connect to a wireless access point.• Refer to “ [Access Point] ” on P125 for the connection method.2 Set the destination.