Panasonic Lumix DMC-TZ2 Operating Instructions Manual

Also see for Lumix DMC-TZ2: Operating instructions Instrucciones de funcionamiento Operating instructions Operating instructions Operating instructions

Folder and file names on computerACCESS74 VQT1B61 VQT1B61 75Connectingwith otherdevices 1 Using with computer Connect to your computer to save, print, and e-mail your pictures.(Using the supplied software is recommended. (P.11).)Preparations: Ensure that you have a sufficiently-charged battery, or an AC adaptorattached (DMW-AC5PP, sold separately).Remove memory card if wishing to use built-in memory.CautionDo not use any other USB connection cables except the supplied one.If using Windows 98/98SE, install USB driver software when connecting for first time.For more details, consult the separate ‘PC connection’ or your computer operatingmanual.Do not disconnect the USB cable while ‘ACCESS’ is displayed.Turn off power and disconnect USB cable before inserting or removing memory cards.When using USB cable with Windows 2000, use ‘ Safely Remove Hardware’application in task tray before inserting card.If the battery display flashes red, cancel the connection from your computer, anddisconnect the USB cable. (Recharge the battery before reconnecting.)To play motion pictures on your computer● Use the ‘QuickTime’ software on the supplied CD-ROM.(Installed as standard on Macintosh)If using Windows 98/98SE/Me, download and install ‘QuickTime 6.5.2 for PC’ from thefollowing website. http://www.apple.com/support/quicktime/● Save motion pictures to your computer before viewing.Only built-in memory can be accessed if connecting in CLIPBOARD mode.USB cable(always use cable supplied)Displayedduring datatransmission.Turn on power of both camera and computerSet to any mode except(Do not move the mode dial while connected to computer.)Connect camera to computerCheck socket direction and insert straight in.(Damage to socket shape can lead to faultyoperation.)If using AC adaptor,turn off camerapower beforeplugging in orremoving.Hold hereAlign marksand insertWindowsDrives are displayed in ‘My Computer’ folder.MacintoshDrives are displayed on the desktop.(Displayed as ‘LUMIX’, ‘NO_NAME’, or ‘Untitled’.)Folder structure100_PANA (Up to 999 pictures/folder)Folder no.File no.JPG: Still pictures MOV: Motion picturesDCIM (Still/motion pictures)Built-in memoryCardMISC (DPOF files)PRIVATE1 (clipboard pictures, P.58)MEMO0001.JPGP1000001.JPGP1000002.JPGP1000999.JPG101_PANA999_PANATo reset file or folder numbers:‘NO. RESET’ (P.22)New folders are created in thefollowing cases:● When pictures are takento folders containing filesnumbered 999.● When using cards alreadycontaining the same foldernumber (including pictures takenwith other cameras, etc)● When recording after performingNO. RESET (P.22)File may not be able to be playedback on camera after changingfile name.(Number can be changed withoutchanging number of digits.)Connecting with PTP (Picture Transfer Protocol)If using Windows XP or Mac OS X, you can connect to your computer in PTP mode bysetting to PRINT mode .Pictures can only be read on computer from camera.It may not be possible to read if there are 1000 or more pictures on the card.The message (PLEASE RE-CONNECT THE PRINTER.) will be displayed if you setto after connecting to your computer. Set the mode dial to a different mode, andreconnect the camera after ‘ACCESS’ disappears.