Panasonic Lumix DMC-TZ2 Operating Instructions Manual

Also see for Lumix DMC-TZ2: Operating instructions Instrucciones de funcionamiento Operating instructions Operating instructions Operating instructions

78 VQT1B83 VQT1B83 79Connectingwith otherdevices 2 Printing (Continued)Print settingsItem SettingsPRINT WITH DATE OFF/ONNUM. OF PRINTS Set number of picturesPAPER SIZE(printer takes priority)L/3.5”×5”2L/5”×7”POSTCARDA4CARD SIZE10×15cm4”×6”8”×10”LETTER(89 × 127 mm)(127 × 178 mm)(100 × 148 mm)(210 × 297 mm)(54 × 85.6 mm)(100 × 150 mm)(101.6 × 152.4 mm)(203.2 × 254 mm)(216 × 279.4 mm)PAGE LAYOUT(printer takes priority) / (1 picture, no border) /(1 picture, with border) / (2 pictures) / (4pictures)Items may not be selected if incompatible with printer.To print to paper sizes/layouts not supported by this camera, set to and makesettings on the printer.(Consult your printer’s operating manual.)e.g. To print the same picture 4 times on 1 sheetLayout setting: (4 screens) Print copies: 4(Setting print copies to 1 will print 4 different pictures.)Date printingƔIf printing in shop: Make DPOF settings (P.68) and request printing ‘with dates’.ƔIf using printer: Make DPOF settings (P.68) and use a printer compatible with dateprinting.ƔIf using the supplied software: Set to ‘with dates’ in the print settings.ƔUse the supplied software to print age for ‘BABY’ (P.42) or ‘PET’ (P.44) scene modes,or days elapsed in ‘TRAVEL DATE’ (P.48). (These cannot be requested in shops.)ƔEven if DPOF settings are made, dates may not be printed with some shops orprinters.ƔSettings on the actual printer may be prioritized in some cases. Check the dateprinting settings on your printer.ƔDo not set date printing on pictures onto which ‘DATE STAMP’ (P.66) is applied,otherwise date will be printed twice.Connectingwith otherdevices 3 Viewing on TV screenYou can view pictures on a TV screen by connecting your camera to your TV with thesupplied AV cable.Preparations: Turn off both camera and TV.Set the TV aspect (P.22).NoteDo not use any other AV cables except the supplied one.You can view pictures on TVs in other countries (regions) which use the NTSC or PALsystem when you set ‘VIDEO OUT’ in SETUP menu.Pictures can only be displayed on TV by using mode.Some televisions may cut off the edges of pictures, or not display them full screen.Pictures rotated to portrait may be blurred slightly.Change picture mode settings on TV if aspect ratios are not displayed correctly onwidescreen or high-definition televisions.Also consult TV operating manual.If problems such as picture flickering occur, set ‘VIDEO OUT’ (P.22) to ‘PAL’.AV cable(always use cable supplied)Connect camera to TVTurn on TVSet to auxiliary input.Turn on cameraSet toCheck socket direction and insert straight in.(Damage to socket shape can lead to faultyoperation.)Yellow: To video socketWhite: To audio socketIf your TV has an SD memory card slot, you canview still pictures by inserting a card directly.* Pictures may not be viewable from someMultiMediaCards.Hold hereAlign marksand insert