- 87 -Burst functionRecording mode:A burst of still pictures can be recorded while the shutter button is pressed fully.Select [Burst] from the [Rec] menu (→51)Use cursor button to select the burst setting, and press[MENU/SET]Setting Speed Description No. ofpictures∗1 Approx. 2 - 10pictures/sec.• The burst speed is adjusted automatically inaccordance with the movements of people, petsor other subjects. ([Intelligent Burst mode])• When a fast-moving subject is recorded, theframe rate becomes faster and the numberof pictures that can be recorded in a series isrestricted to about 10.100∗2Approx. 2pictures/sec.• The subject is brought into focus as far as thisis allowed by the burst speed. The pictures aretaken with the burst function while the exposureand White Balance are being adjusted.(However, when the burst function is operatingduring motion picture recording, the focus isfixed to the first picture.)• The burst speed may be reduced under certainrecording conditions.100∗2Approx. 5pictures/sec.Approx. 10pictures/sec.• Focus, exposure and White Balance are fixed inthe first picture. 1040 pictures/sec.• Focus, exposure and White Balance are fixed inthe first picture.• Note on the picture size setting (→88)4060 pictures/sec.• Focus, exposure and White Balance are fixed inthe first picture.• The recordable range is reduced.• Note on the picture size setting (→88)60∗3Complies withrecordingconditions• The burst of still pictures can be recorded evenin low light conditions as the flash is used.([Flash Burst])• The focus, exposure, and flash level are allfixed to the settings for the first picture.• Note on the picture size setting (→88)5[OFF] — The burst function is released. —∗1 Only in the mode∗2 The number of burst pictures is limited by the picture-taking conditions and the type and/orstatus of the card used.∗3 Only in the , , mode
