VQT4P25Application (Record)Taking pictures according to the scene [Scene Mode]- 85 -• How to select a scene (→78)[3D Photo Mode]Pictures are recorded continuously while moving the camera horizontally, and twopictures selected automatically are combined to make a single 3D picture.To view 3D pictures, a television that supports 3D is required (This unit will play back in2D). (→134)Start the recording and then slidethe camera horizontally straightfrom left to right• A guide is displayed while recording.• Move the camera approximately 10 cm(0.33 feet) within approximately 4 secondsusing the guide.Tips for recording pictures• Record a stationary subject.• Record a picture outdoors or in other bright locations.• Press the shutter button halfway to fix the focus and the exposure, press the shutterbutton fully, and then slide the camera.• Hold the camera so that the subject is slightly to the right of the centre on thedisplay at the start of the recording. This makes it easier to position the subject inthe centre of the recorded picture.●3D still pictures cannot be recorded by holding this camera vertically.● 3D still pictures are recorded in MPO format (3D).● The zoom position is fixed to the W end.● The picture size is fixed to 2M .● ISO Sensitivity is automatically adjusted. However, ISO Sensitivity is increased tomake the shutter speed faster.● Motion pictures cannot be recorded.● [Stabilizer] does not function.● It may be impossible to record pictures under any of the conditions below. Even ifpictures are recorded, they may not have a 3D effect or may appear distorted.• When the subject is too dark or too bright• When the subject’s brightness changes• When the subject is moving• When pictures are recorded underwater• When the subject lacks contrast
