Panasonic Lumix DMC-TZ60 Basic Operating Instructions Manual

Also see for Lumix DMC-TZ60: Quick guide Operating instructions Basic operating instructions Basic operating instructions Basic operating instructions

OthersMessage displaysVQT5E85- 301 -[Read Error] / [Write Error] [Please check the card]● Data read has failed.→ Check whether card has been inserted correctly (→24).● Data write has failed.→ Turn off the camera and remove the card. Reinsert the card and turn the camera on again.● Card may possibly be damaged.→ Try with a different card.[Cannot record due to incompatible format(NTSC/PAL) data on this card.]● Format the card after saving necessary data on a PC etc. (→74)→ Insert a different card.[Motion recording was cancelled due to the limitation of the writing speed of the card]● Motion picture recording may be automatically terminated with certain cards.→ If recording stops even when using a card of the recommended speed class (→25), the data writingspeed has dropped. If this happens, we recommend backing up the data on the memory cardand formatting it (→74).[A folder cannot be created]● Folder numbers in use have reached 999.→ Save needed data on a computer or other device, and then use [Format] on the camera (→74).Folder number is reset to 100 when performing [No.Reset] (→71).[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]● AV cable (optional) is connected to camera.→ To remove message immediately → Press [MENU/SET].→ To change aspect ratio → Change [TV Aspect] (→72).● USB connection cable (supplied) is only connected to camera.→ Message disappears when cable is also connected to another device.[This battery cannot be used]● Use a genuine Panasonic battery.● Battery cannot be recognised as terminal is dirty.→ Wipe any dirt away from the battery terminal.[GPS feature is not available in this region.]● GPS may not work in China or in the border regions of countries neighbouring China. (Current as ofJanuary 2014)[Recording failed.]● Recording may be impossible if the recording location for a 3D image is too dark/too bright, or if thesubject lacks contrast.