Panasonic Lumix DMC-TZ8EB Service Manual

216.2. ICS (Indication of additional Camera Settings when picture was taken)function1. General descriptionThis unit is equipped with ICS (ICS：Indication of additional Camera Settings when picture was taken) function by playing back theconcerned picture on the LCD display.(This function is achieved by utilizing "maker note" data stored in Exif data area of recorded picture file.)To proceed failure diagnosis, use this ICS function together with "displaying the recorded picture with picture information" function.Note:*.The ICS function operates with a picture which is only taken with the same model. (It may not be displayed when the picturewas taken with other model.)*.Since Exif data is not available after the picture is edited by PC, the ICS function may not be activated.2. How to displayThe ICS data is displayed by ordering the following procedure:• Preparation:1.Attach the Battery or AC Adaptor with a DC coupler to the unit.2. Set the mode dial to the PROGRAM AE mode.• Step 1. The temporary cancellation of "INITIAL SETTINGS":Set the REC/PLAYBACK selector switch to "REC (Camera mark)".While keep pressing "UP of Cursor button" and DISPLAY button simultaneously, turn the Power on.• Step 2. Execute the ICS display mode:Set the REC/PLAYBACK selector switch to PLAYBACK.Select the concerned picture by pressing the "LEFT and RIGHT of Cursor button".Press the "LEFT of Cursor button", MENU/SET button and DISPLAY button simultaneously.Press the DISPLAY button, 3 times.The display condition is changed as shown below when the DISPLAY button is pressed.Code display → Code + Picture display (1) → Code + Picture display (2) → ICS display → .....