Panasonic Lumix DMC-ZS100 Basic Owner's Manual

Also see for LUMIX DMC-ZS100: Owner's manual Quick guide

37SQT1166 (ENG)Recording1 Press the motion picture button to startrecording• Recording of motion picture appropriate for eachmotion picture mode is possible.• While you are recording motion pictures, therecording status indicator (red) will flash.• If some information is no longer displayed on thescreen, press the [DISP.] button or touch the monitor.• If you press the shutter button down fully, you cantake still pictures while recording motion pictures.• Immediately release the motion picture button afterpressing it.Recording state indicatorElapsed recordingtimeRemaining recordingtime2 Press the motion picture button again to end recording● If the surrounding temperature is high, or a motion picture is recordedcontinuously, [ ] is displayed and recording may be stopped halfway throughto protect the camera. Wait until the camera cools down.● With recording in a quiet environment, the sound of aperture, focusand other actions may be recorded in motion pictures. This is not amalfunction.The focus operation during recording of motion pictures can be set to [OFF] in[Continuous AF].● Motion pictures with [Rec Quality] setting of [FHD/28M/60p]/[FHD/17M/60i] in[AVCHD]:Recording stops when the continuous recording time exceeds 29 minutes and59 seconds.● Motion pictures with their file size set to [FHD], [HD] or [VGA] in [MP4]:Recording stops when the continuous recording time exceeds 29 minutes and59 seconds or the file size exceeds 4 GB.• Since the file size becomes larger with [FHD], recording with [FHD] will stopbefore 29 minutes 59 seconds.