- 135 -Wi-Fi• Read the [Help] in the “Image App” menu for further details on how to operate.• To quit [Remote Shooting], press [ ].• Caution:Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject whenyou use this function. Use at your own risk.• If you have changed the clock setting of this unit or the smartphone/tablet after [Time sync], perform[Time sync] again.• On the smartphone/tablet, you can set the acquisition interval of location information and check thetransfer status of location information. Refer to [Help] in the “Image App” menu for details.• The smartphone/tablet may fail to acquire location information in China and the border area in theneighbouring countries of China. (As of January 2013)• (When using “Image App” for iOS)If you press the Home or On/Off button of a smartphone/tablet while [Rec. loc. Info] is working,location information recording is stopped.If you want to make a Wi-Fi connection with the setting you used before, you can select it fromthe history, and connect.• The number of settings that can be saved in the history is limited. It is recommended that you savefrequently used Wi-Fi connection settings in [Favorite Connection]. (P136)• Performing [Reset Wi-Fi Settings] clears the history and the contents saved in [Favorite Connection].1 Press [Wi-Fi].2 Press 3/4/2/1 to select [History Connection], andthen press [MENU/SET].3 Select the desired connection setting with 3/4, and then press[MENU/SET].• To display the connection detail, press [DISP.].• To save the selected connection setting in [Favorite Connection], readsteps 3 and 4 of “Registering to favourites”. (P136)History Connection