23VQT2N71∫ About storage and inspection after use≥ Always take the digital camera out of the Case.≥ Make sure that no dirt or dust is stuck to the O-ring.≥ Thoroughly dry the Case at room temperature and then store it in a cool, dark place.≥ We recommend that the Case be inspected about 3 years after purchase. Thisinspection involves dismantling and cleaning the Case, inspecting all the parts andrepairing them if necessary and checking the waterproofness of the Case using thesame hydrostatic test equipment that was used to check the waterproofness beforepurchase. The customer is responsible for all transportation costs.≥ Do not dismantle any parts or use any accessories not specified in these operatinginstructions and do not alter the Case. If the Case does not work properly, consultyour dealer.SpecificationsCompatible model: DMC-TZ10/DMC-ZS7/DMC-TZ9/DMC-ZS6/DMC-TZ8/DMC-ZS5(As of January 2010¢)Dimensions: Approx. 150 mm (W)k94 mm (H)k93 mm (D)[5 15/16q (W)k3 3/4q (H)k3 11/16q (D)](excluding the projecting parts)Mass (Weight): Approx. 442 g/0.974 lb (including the diffuser)Material: PolycarbonateWaterproof construction: O-ring sealingWater resistant depth: 40 m/130 feet¢ Refer to the operating instructions, catalogue, website etc. of the digitalcamera for the latest information on models that can be used.One Panasonic Way, Secaucus, NJ 07094Panasonic Consumer Electronics Company,Division of Panasonic Corporation of North AmericaPanasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Panasonic Corporation 2010 Printed in Japan