Panasonic MINAS-BL KV Series Technical Instructions

Contents

－ 3 －－ 2 －CAUTIONDANGERDo not touch the rotating part of the motorwhile operating.The failure could result in injuries.Ground the earth of the brushless motor andbrushless amplifier.The failure could resultin electric shocks.Do not expose the cables to sharp objects,excessive pressing or pinching forces, andheavy loads.The failure could result in electricshocks, damages, or malfunction.Install an external emergency stop deviceto shut down the main power source in anyemergency.The failure could result in electric shocks,injuries, fire, damages or malfunction.Do not place inflammable matter near the motor,amplifier and external regenerative resistor.The failure could result in fire.Mount the brushless motor, brushlessamplifier and external regenerative resistor onincombustible material such as metal.The failure could resultin electric shocks, injuries, or fire.Arrange the phase sequense of the motor andwiring of the CS sensor.The failure could resultin injuries, damages, or malfunction.Do not climb or stand on the brushlessequipment.The failure could result in electric shocks,injuries, damages, or malfunction.Make sure to secure the safety after theearthquake.The failure could resultin electric shocks, injuries, or fire.Do not approach to the equipment afterrecovery from the power failure because theymay restart suddenly.The failure could result in injuries.Do not hold the cables or motor shaft whentransporting the motor.The failure could result in injuries.Do not touch the motor, amplifier, and externalregenerative resistor, since they become hot.The failure could result in burns.An over-current protection, earth leakagebreaker, over temperature protecter andemergency stop device must be installed.The failure could resultin electric shocks, injuries, or fire.Transportation, wiring and checking mustbe performed with power source turned offand after making sure that there is no risk ofelectric shock.The failure could resultin electric shocks or injuries.Do not subject the product to water, corrosiveor flammable gases, and combustibles.The failure could result in fire.Install the product properly to avoid personalaccidents or fire in case of an earthquake.The failure could resultin electric shocks, injuries, or fire.Do not connect the cable (U, V and W) of thebrushless motor directly to the commercialpower source.The failure could resultin fire, malfunction or damage.Do not put your hands in the brushlessamplifier.The failure could result in burns,or electric shocks.Only persons who are trained and qualifiedto work with or on electrical equipment arepermitted to operate or maintain this equipment.The failure could resultin electric shocks.Do not drive the motor from the external power.The failure could result in fire.Never start and stop the motor by magnetcontactor which is provide on the main line.The failure could result in damages.Safety Precautions ImportantThe following explanations are for things that must be observed in order toprevent harm to people and damage to property.• Misuses that could result in harm or damage are shown as follows, classifiedaccording to the degree of potential harm or damage.Danger Indicates great possibility of death or seriousinjury.Caution Indicates the possibility of injury or propertydamage.• The following indications show things that must be observed.Indicates something that must not be done.Indicates something that must be done.