Panasonic NV-GS120 Operating Instructions Manual

Also see for NV-GS120: Brochure & specs Operating instructions Operating instructions

Contents

Panasonic NV-GS120 Operating Instructions Manual Manual pdf 30 page image

Recording Mode-30-2 Press the [ENTER] Button (17).≥The [AWB] Indication appears.3 Press the [5] Button (16) or [6] Button(19) to select a desired White BalanceMode.1) Automatic White Balance Adjustment [AWB]2) The white balance setting that was previouslyset manually [1]3) Outdoor Mode [z]4) Indoor Mode (recording under incandescentlamp) [{]To Resume Automatic AdjustmentPress the [5] Button (16) or [6] Button (19)until the [AWB] Indication appears. Or, set the[AUTO/MANUAL/FOCUS] Switch to [AUTO].ª About Black Balance AdjustmentBlack Balance Adjustment is one of the functionsof the 3CCD system. It automatically adjusts thehue of black color in the picture. When the BlackBalance Adjustment is activated, the screenbecomes dark for a moment.1Adjusting the Black Balance (Blinking)2Adjusting the White Balance (Blinking)3Adjustment is completed. (Lighting)Adjusting White Balance ManuallyWhite Balance Adjustment recognizes the colourof light and adjust so that the white colour willbecome pure white. The Movie Cameradetermines the hue of light that comes throughthe Lens and White Balance Sensor, therebyjudging the recording condition, and selects theclosest hue setting. This function is calledAutomatic White Balance Adjustment.For light outside the functional Auto WhiteBalance Adjustment range, use the Manual WhiteBalance Adjustment Mode.FADESTILLENTER is(17)1111AWB1)3)2)4)1 2 31 Set the [AUTO/MANUAL/FOCUS] Switch(35) to [MANUAL].≥The [MNL] Indication appears.2 Press the [ENTER] Button (17).≥The [AWB] Indication appears.3 Press the [5] Button (16) or [6] Button(19) until the [1] Indication is displayed.4 Point the Movie Camera at a full-screenwhite subject.5 Keep pressing [ENTER] Button (17) until the[1] Indication stops flashing.To Resume Automatic AdjustmentPress the [5] Button (16) or [6] Button (19)until the [AWB] Indication is displayed. Or, set the[AUTO/MANUAL/FOCUS] Switch to [AUTO].ª About White Balance SensorThe White Balance Sensor (29) determines thenature of the light source during recording.≥Do not cover the White Balance Sensor withyour hand during recording because WhiteBalance will not function normally.≥The red light from the Recording Lamp (27) willbe reflected off your hand or object, possiblycausing the White Balance sensor to operateincorrectly and changing the colouring.AUTO MANUALFOCUS(35)FADESTILLENTER is(17)MNL1(27)(29)