Panasonic NV-GS150EB Operating Instructions Manual

Also see for NV-GS140EB: Service manual Service manual

Contents

Edit mode42VQT0N436 Move the joystick down to select the [∫]icon to stop playback.7 Stop recording.≥For more information, refer to the operatinginstructions for your TV set and recorder.≥When you do not need functional indications ordate and time indications, press the [OSD]button on the remote control for no indication.(When you connect the movie camera and arecorder with the DV cable, these indicationsmay not appear.)ª When neither image nor sound fromthe movie camera is output to the TVset≥Check that the plugs are inserted as far as theygo.≥Check the connected terminal.≥When no image is presented on the TV even ifset [BASIC] >> [AV JACK] >> [OUT/Ë], set to[OUT]. (-48-)Using the DV Cable for Recording(Digital Dubbing)By connecting other digital video equipment withDV terminal and the movie camera by using theDV cable VW-CD1E (optional) 1, high-image-quality dubbing can be done in digital format.Only the NV-GS150 can be used as aRecorder.≥Set to Tape Playback Mode. (Player/recorder)1 Connect the movie camera and digital videoequipment with the DV cable.2 Set [ADVANCE] >> [REC STDBY] >> [YES].(Recorder)≥You do not have to follow this step when theremote control is used in the digital dubbing.3 Start playback. (Player)4 Start recording. (Recorder)Move the joystick up to select [¥/;] icon.Or, while pressing the [¥REC] button on theremote control, press the [1] button.5 Move the joystick up to select the [¥/;]icon again or press the [;] button on theremote control to stop recording.(Recorder)6 Stop playback. (Player)ª To cancel the standby for recordingWhen the camera is standby for recording, movethe joystick down and select the [∫] icon.≥Do not plug or unplug the DV cable duringdubbing, or the dubbing may not be completedproperly.≥If a picture (bilingual video, etc.) containing mainsound and sub sound has been dubbed, select1STOPV/REWSTILL ADV VOL¥REC A.DUBPLAYPAUSEFF/WSTILL ADVTW