Edit mode39VQT0N50≥For more information, refer to the operatinginstructions for your TV set and recorder.≥When you do not need functional indications ordate and time indications, press the [OSD]button on the remote control for no indication.(When you connect the movie camera and arecorder with the DV cable, these indicationsmay not appear.)ª When neither image nor sound fromthe movie camera is output to the TVset≥Check that the plugs are inserted as far as theygo.≥Check the connected terminal.≥When no image is presented on the TV even ifset [BASIC] >> [AV JACK] >> [OUT/Ë], set to[OUT]. (-44-)Using the DV Cable for Recording(Digital Dubbing)By connecting other digital video equipment withDV terminal and the movie camera by using theDV cable VW-CD1E (optional) 1, high-image-quality dubbing can be done in digital format.≥Set to Tape Playback Mode. (Player/recorder)1 Connect the movie camera and digital videoequipment with the DV cable.2 Set [ADVANCE] >> [REC STDBY] >> [YES].(Recorder)≥You do not have to follow this step when theremote control is used in the digital dubbing.3 Start playback. (Player)4 Start recording. (Recorder)Move the joystick up to select [¥/;] icon.Or, while pressing the [¥REC] button on theremote control, press the [1] button.5 Move the joystick up to select the [¥/;]icon again or press the [;] button on theremote control to stop recording.(Recorder)6 Stop playback. (Player)ª To cancel the standby for recordingWhen the camera is standby for recording, movethe joystick down and select the [∫] icon.≥Do not plug or unplug the DV cable duringdubbing, or the dubbing may not be completedproperly.≥If a picture (bilingual video, etc.) containing mainsound and sub sound has been dubbed, selectthe desired sound by [SETUP] >> [AUDIO OUT]on playback.≥Even if you use a device equipped with DVterminals such as IEEE1394, you may not beable to perform digital dubbing in some cases.For more information, see the instructions forequipment connected.≥Regardless of the menu settings on therecorder, digital dubbing is carried out in thesame mode as the [AUDIO REC] mode of theplayback tape.≥The images on the recorder monitor may bedisturbed, but it does not affect the recordedimages.≥If a picture containing a copyright protectionsignal (copy guard) is recorded by the moviecamera, the picture is distorted by mosaic-likepatterns at playback.≥Disconnect the USB cable since input signalsfrom the external input terminal cannot berecorded while it is connected with the USBcable.≥When wide images are input, the display suchas the menu screen or the operation icon isexpanded horizontally.≥While pictures are input from the DV terminal,the operation icon blinks on instead ofappearing from the side of the screen when youpress the center of the joy stick.1STOPV/REWSTILL ADV VOL¥REC A.DUBPLAYPAUSEFF/WSTILL ADVTW