Panasonic NV-GS22 Operating Instructions Manual

Editing Mode-34-Editing ModeAudio DubbingYou can add music or narration to the recordedCassette.≥If the tape recorded in the [16bit] Mode isdubbed with the Audio Dubbing function, theoriginal sound is erased. (If you wish topreserve the original sound, use the [12bit]Mode when recording.)≥Audio Dubbing cannot be performed on arecording made in LP Mode. (-16-)1 Press the [;] Button (69) on the RemoteController where you want to add newsound.2 Press the [A.DUB] Button (55) on theRemote Controller.3 To start Audio Dubbing, press the [;]Button (69) on the Remote Controller.To Cancel Audio DubbingPress the [;] Button (69) on the RemoteController.The Movie Camera is in the Still Playback Modeagain.To Play Back the Sound Recorded by 12bitAudio DubbingSet [TAPE PLAYBACK MENU] >> [PLAYBACK]>> [12bit AUDIO] >> [ST2] or [MIX].ST1: It plays back only the original sound.ST2: It plays back only the sound added by AudioDubbing.MIX: It plays back both the original sound and thesound added by Audio Dubbingsimultaneously.To Dub Audio While Listening to aPre-recorded SoundWhen pausing the audio dubbing, set the[12bit AUDIO] on the [PLAYBACK] Sub-Menu to[ST2] and you can check the pre-recorded sound.Use headphones to listen to the pre-recordedsound while dubbing the audio.≥For other notes concerning this item, see -40-.INDEX INDEXSELECTSTOPK L∫V/REWSTILL ADVTWsVOLr¥RECMULTI/P-IN-P A.DUBPLAYPAUSEFF/WSTILL ADV6 1 5;E DP.B. ZOOM(55)(69)Copying on an S-VHS (or a VHS)Cassette(Dubbing)After connecting the Movie Camera and theVCR as illustrated, start the followingprocedures.1 AV Cable2 S-Video Cable≥If your TV is not equipped with AV InputSockets, the 21-pin Adaptor (purchaseseparately) is necessary. Consult your dealer.≥Be sure to press the [OSD] Button (-7-) on theRemote Controller prior to copying so that noindications are visible. Otherwise, the displayedtape counter and function indications are alsocopied.Movie Camera:1 Insert the recorded Cassette.VCR:2 Insert an unrecorded Cassette with anerasure prevention tab.≥If various setups (such as external input, tapespeed, etc.) are required, please refer to theoperating instructions of your VCR.Movie Camera:3 Press the [1] Button to start playback.VCR:4 Start recording.5 Press the Pause or Stop Button to stoprecording.Movie Camera:6 Press the [∫] Button to stop playback.21-pin Adaptor12[VIDEO IN][AUDIO IN][S-VIDEO IN]S-VIDEOOUTA/V OUTPHONESREMOTE/MIC DV(PLUG IN POWER)