64VQT0T48ª Inserting/removing a cardBefore inserting/removing a card, set the[OFF/ON] switch to [OFF].≥If the card is inserted or removed with the powerturned on, this camera may malfunction or thedata recorded on the card may be lost.1 Turn off the power 1.≥Check that the Status indicator has gone off.2 Slide the card slot cover outwards to open.3 Insert/remove the card into/from the card slot.≥When inserting a card, face the label side 1towards you and push it straight in with onestroke as far as it goes.≥When removing the card, press the centre ofthe card and then pull it straight out.4 Securely close the card slot cover.ª Selecting a modeRotate the mode dial to select the desired mode.1 Rotate the mode dial.≥Set your desired mode to 1.: TAPE RECORDING MODEUse this when you record the image on a tape.(Also, you can simultaneously record still pictureson a card while recording images on a tape.): TAPE PLAYBACK MODEUse this to play back a tape.: CARD RECORDING MODEUse this to record still pictures on a card.: CARD PLAYBACK MODEUse this to play back the still pictures recorded ona card.: PC CONNECTION MODEYou can view or edit the images recorded on acard on your personal computer.(Refer to the operating instructions for PCconnection.)OFF ON11211PCPC