5.2. DISASSEMBLY PROCEDURESFlow-Chart for Disassembly ProcedureNo. Item / Part Fig. Removal (Screw,Connector,Flex. &Other)1 Front CaseUnitFig. D2 Remove the Grip Belt Piece with theprocedure of arrow 1,2,3.Fig. D3 1-Screw (A), 1-Screw (B)Fig. D4 2-Screws (C), 1-Screw (D)Fig. D5 1-Connector FP6505Front Case Unit2 Side Case (R)UnitFig. D6 2-Screws (E)Fig. D7 1-Screw (F), 2-Screws (G)Fig. D8 2-Connectors FP602, FP6503Side Case (R) Unit3 Lens Unit Fig. D9 1-Screw (H)2-Connectors FP201, FP701Lens Unit4 EVF Unit Fig. D10 1-Screw (I)1-Connector FP601EVF Unit5 RearOperation UnitFig. D11 1-Screw (J), 1-Screw (K), 1-Screw (L)2-Connectors FP1001,FP6502Rear Operation Unit6 Main C.B.A. Fig. D12 1-Screw (M)7-Connectors FP2201, FP2202,FP2203, FP2204,FP5001,FP6501,FP65044-TabsMain C.B.A.7 Mecha. Unit Fig. D13 Open the Cassette Cover3-Screws (N)Mecha. Unit8 Jack C.B.A. Fig. D14 1-Screw (O), 1-Screw (P), 1-Screw (Q)Jack C.B.A.9 Monitor C.B.A. Fig. D15 Turning the LCD Unit2-Screws (R)LCD UnitFig. D16 2-Screws (S)6-TabsLCD Case (Upper) UnitFig. D17 1-Connector FP902LCD Hinge UnitFig. D18 1-Connector FP901Monitor C.B.A.10 EVF C.B.A. Fig. D19 2-TabsEVF Hold pieceFig. D20 View ADJ. Unit is Drawn2-Screws (T)2-TabsView ADJ. Unit2-Screws (U), 2-Slide spacers (V)1-Connector FP801EVF Slide Unit / EVF LCD UnitFig. D21 2-Screws (W)EVF Plate / Click SpringFig. D22 1-Connector FP8023-TabsEVF C.B.A.Fig. D1Fig. D211NV-GS75E / NV-GS75EG / NV-GS75EB / NV-GS75EK / NV-GS75EP / NV-GS75GC / NV-GS75GN / NV-GS75GCD / NV-GS78GK