Before using9VQT0N57Using the viewfinderª Extending the viewfinder1 Pull out the viewfinder and extend it bypinching the extension knob.ª Adjusting the field of view1 Adjust the focus by sliding the eyepiececorrector knob.≥You can adjust the brightness of the viewfinderfrom the menu.Power supplyª Charging the batteryWhen this product is purchased, the battery is notcharged. Charge the battery before using thisproduct.≥Battery charging time (-10-)≥We recommend using Panasonic batteries.≥If you use other batteries, we cannot guaranteethe quality of this product.≥If the DC input lead is connected to the ACadaptor, then the battery will not get charged.Remove the DC input lead from the AC adaptor.1 Connect the AC mains lead to the ACadaptor and the AC mains socket.2 Put the battery on the battery mount byaligning the mark, and then securely plug itin.ª Charging lampLights up:ChargingGoes off: Charging completedFlashing: The battery is over discharged(discharged excessively). In a while,the lamp will light up and normalcharging will start.When the battery temperature isexcessively high or low, the [CHARGE]lamp flashes and the charging time willbe longer than normal.ª Connecting to the AC outlet1 Connect the AC mains lead to the ACadaptor and the AC mains socket.2 Connect the DC input lead to the ACadaptor.3 Connect the DC input lead to this product.≥The output plug of the AC mains lead is notcompletely connected to the AC adaptorsocket. As shown in 1, there is a gap.≥Do not use the power cord for otherequipment since the power cord is exclusivelydesigned for the movie camera. Or do not usethe power cord of other equipment for themovie camera.ª Fitting the batteryPush the battery against the battery holder andslide it until it clicks.12:30:4512:30:4512:30:451.4. 20051.4. 20051.4. 2005 12:30:451.4. 20051