Panasonic NV-MX8A Operating Instructions Manual

Contents

23MNL1/100121 2,3AUTO MNL PUSHMENUW.B/SHUTTER/IRIS/VOL/JOGMNL1/50F2.4121 2,3AUTO MNL PUSHMENUW.B/SHUTTER/IRIS/VOL/JOGMFMNL 121 3FOCUS2 AUTO MNL PUSHMENUW.B/SHUTTER/IRIS/VOL/JOGManual Shutter Speed AdjustmentIt is useful for recording fast-moving subjects.1 Set the Mode Selector Switch to [MNL].≥The [MNL] indication appears.2 Press the [PUSH] Dial until the [1] indication appears.3 Turn the [PUSH] Dial to adjust the shutter speed.Range of Shutter Speed Adjustment1/50–1/8000 sThe standard shutter speed is 1/50 s.Selecting a speed closer to [1/8000] causes the shutter speed to be faster.To Resume Automatic AdjustmentSet the Mode Selector Switch to [AUTO].≥For other notes concerning this item, see page 48.~~~~~~~~~~~~~~~~~~~~~~~~~Manual Iris Adjustment(F Number)You can use this function when the screen is too bright or too dark.1 Set the Mode Selector Switch to [MNL].≥The [MNL] indication appears.2 Press the [PUSH] Dial until the [1] indication appears.3 Turn the [PUSH] Dial to adjust the iris.Range of Iris AdjustmentCLOSE (Closed), F16, ..., F2.0,OP (Opened)i0dB, ..., OPi18dBWhen the Gain-up Mode [GAINUP] (l 25) is used, Iris adjustment is byOPi12dB.When a value closer to [CLOSE] is selected, the image becomes darker.When a value closer to [OPi18dB] is selected, the image becomes brighter.The value to which idB is attached indicates a Gain-up value. If this value istoo large, the quality of the image deteriorates.≥[OP] indicates [F1.8].To Resume Automatic AdjustmentPress the [PUSH] Dial. Or set the Mode Selector Switch to [AUTO].≥For other notes concerning this item, see page 48.~~~~~~~~~~~~~~~~~~~~~~~~~Manual Focus AdjustmentFocus can be adjusted manually for recording in a situation where auto focusmay not function well.1 Set the Mode Selector Switch to [MNL].≥The [MNL] indication appears.2 Press the [FOCUS] Button.≥The [MF] Indication (Manual Focus Mode) 2 appears.3 Turn the [PUSH] Dial to adjust the focus.To Resume Automatic AdjustmentPress the [FOCUS] button to turn off the [MF] indication. Or set the ModeSelector Switch to [AUTO].