Panasonic PGA26E07BA-SWEVB006 Manual

Contents

Panasonic PGA26E07BA-SWEVB006 Manual Manual pdf 15 page image

PGA26E07BA-SWEVB006 Ver. 1.2 15Important NoticePlease read and understand the following items, "Restriction", and "Caution" before using the evaluationboard:Restriction The evaluation board is intended for use as engineering development, verification or evaluation purposesonly. This evaluation board is not intended for a finished end-product fit for general consumer use. Do not operate in condition other than the recommended settings. The evaluation board must be used only by qualified engineers and technicians that have electronicstraining, familiar with handling of high-voltage electrical systems and observe good engineering practisestandards. The evaluation board is meant to be operated in lab environment under the safe conditions. Please use a protective case (accessory) during evaluation. All of the specifications and evaluation data in this manual are for reference only and not guaranteed. Theinformation may subject to change without notice. Please contact to Panasonic representative for thelatest information. The user assumes all responsibility and liability for proper and safe handling of this evaluation board.Further, the user indemnifies Panasonic from all claims arising from the handling or use of the evaluationboards. The technical information described in this document is intended only to show the main characteristicsand application circuit examples of the products. No license is granted in and to any intellectual propertyright or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility isassumed by our company as to the infringement upon any such right owned by any other company whichmay arise as a result of the use of technical information described in this document.Caution The evaluation board carries hazardous high voltage. Do not touch when power is applied. Otherwise, itmay cause severe injury, disability or death. Electric charge may be accumulated in the capacitors. To prevent electrical shock, please ensure all thecapacitors are properly discharged before touching the evaluation board. It is the user’s responsibility to confirm that the voltages, isolation requirements, and rated value areidentified and understood, prior to handling the evaluation board. Do not leave the evaluation board unattended while power is applied and do not perform other activitynear the evaluation board while power is applied. This board contains parts that are susceptible to damage by electrostatic discharge (ESD). It is the user’sresponsibility to take any and all appropriate precautions with regard to electrostatic discharge whenusing the evaluation board. Should the evaluation board does not meet the specification indicated in the User’s Guide, the board maybe exchanged with a new one within 30 days from the date of delivery. When exchanging the evaluationboard, please return the board with all items included. The warranty on this evaluation board is considered void once a part on the board is removed or modified. The evaluation board does not fall within the scope of the technical requirements of the followingdirectives or other related directives:- Restriction of Hazardous Substances (RoHS)- Directive on Waste Electrical and Electronic Equipment (WEEE)- Mandatory conformity marking for products sold in the European Economic Area (CE)- Federal Communications Commission (FCC)- Underwriters Laboratories, Inc. (UL)

/ 17

Related manuals for Panasonic PGA26E07BA-SWEVB006